New Beetle GLS L4-1.8L Turbo (AWV) (2001)
-
Unscrew coolant pump securing bolts -1- and remove coolant pump -2-
Installing
Installation is carried out in the reverse order; when doing this note the following:
-
Moisten new O-ring with coolant.
-
Insert coolant pump into cylinder block and tighten securing bolts.
Tightening torque: 15 Nm
-
Install toothed belt and adjust valve timing.
-
Install ribbed belt.
-
Filling with coolant. See: Cooling System/Service and Repair