New Beetle GLS L4-1.8L Turbo (AWV) (2001)
Clutch Switch: Testing and Inspection
With Manufacturer's Scan Tool
Signal From Clutch Vacuum Vent Valve Switch -F36-, Checking, Vehicles From MY 2001
Special tools, test equipment and auxiliary items
-
VAG 1551 scan tool or VAG 1552 mobile scan tool with VAG 1551/3B cable
-
VAG 1598/31 test box
-
VAG 1526 hand multimeter or VAG 1715 multimeter
-
VAG 1594 adapter set
-
Electrical Wiring Diagram
Test conditions
-
All fuses must be OK
-
Battery voltage must be at least 11.5 V
-
All electrical accessories, e.g. lights and rear window defroster must be switched off
Test sequence
-
Connect VAG 1551 scan tool (or VAG 1552). Switch ignition on and select Motronic Engine Control Module (ECM) -J220- with "Address word"
01. Connecting scan tool and selecting Motronic Engine Control Module (ECM) -J220-. See: Testing and Inspection/Reading and Clearing
Diagnostic Trouble Codes/Scan Tool Connecting/With Manufacturer's Scan Tool/Connecting VAG 1551 Scan Tool
Indicated on display
Rapid data transfer
HELP
Select function XX
-
Press buttons -0- and -8- for function "Read measuring value block" and confirm entry with -Q- button.
Indicated on display
Read measuring value block
Input display group number XXX
-
Press buttons -0-, -6- and -6- for "display group 66" and confirm with -Q- button.
Indicated on display (1 to 4 = Display zones)
Read measuring value block 66
->
1
2
3
4
-
Observe display in display zone 2 (3rd digit from right).
Specification: x x x x x 0 x x
-
Depress clutch pedal fully and observe display in display zone 2.
Specification: x x x x x 1 x x
-
Press -> button.
-
Press buttons -0- and -6- for "End output" function and confirm input with -Q- button.
-
Switch off ignition.