New Beetle GLS L4-1.8L Turbo (AWV) (2001)
-
Disconnect 6-pin connector -2- at the throttle valve control module -1-.
-
Connect multimeter to terminals 2 + 6 of connector for voltage measurement.
-
Switch ignition on.
Specified value: at least 4.5 V
-
Switch ignition off.
-
Connect multimeter to terminal 2 of connector and Ground (GND) for voltage measurement.
-
Switch ignition on.
Specified value: at least 4.5 V
-
Switch ignition off.
-
Connect test box to control module wiring harness, connect test box for wiring test.
Engine Control Module (ECM) is not connected.