New Beetle GLS L4-1.8L Turbo (AWV) (2001)
/Page-884001.png)
Air Injection Vacuum Control Solenoid Valve: Testing and Inspection
Secondary Air Injection (AIR) valve, checking
Solenoid valve is closed when no voltage is present.
Recommended special tools and equipment
-
VAG1526 multimeter or VAG1715 multimeter
-
VAG1594 connector test kit
-
Wiring diagram
Test requirements
-
The respective fuses of Secondary Air Injection (AIR) Solenoid Valve -N112- must be OK.
-
Ignition switched off.
Test sequence
-
Disconnect 2-pin connector from Secondary Air Injection (AIR) Solenoid Valve -N112- (arrow).
-
Measure resistance between terminals of solenoid valve.
Specified value: 25.0...35.0 ohms
If specified value is not obtained:
-
Replace Secondary Air Injection (AIR) Solenoid Valve -N112-, item 4.
