New Beetle GLS L4-1.8L Turbo (AWV) (2001)
-
From the rear of the upper half of the relay panel, insert the new relay connector block on the new harness assembly into position #9 -arrow-
NOTE: The new relay must be removed from the relay connector on the new harness assembly before installing
-
Route wires 2, 6 and 8 on the new harness assembly behind the fuse/relay panels
-
Locate terminal -8- (arrow) on the new wiring harness assembly
-
Insert terminal 8 on the new wire harness into the empty (B+) location in the 15 amp fuse holder -arrow-
-
Remove (red) connector block -arrow- (for relay position 3) on reverse side of lower relay carrier