New Beetle GLS L4-1.8L Turbo (AWV) (2001)
Turbo Boost Sensor: Testing and Inspection
With Generic Scan Tool
Charge Air Pressure Sensor, Checking
Recommended special tools and equipment e.g.:
-
VAG1526 multimeter or VAG1715 multimeter
-
VAG1594 connector test kit
-
Wiring diagram
Checking voltage supply and wiring to control module
-
Disconnect 4-pin connector -2- from Charge Air Pressure Sensor -G31- (-1-).
-
Use adapter cables from (VAG1594) to connect multimeter to terminals 1 + 3 of connector for voltage measurement.
-
Switch ignition on.
Specified value: at least 4.5 V
-
Switch ignition off.
If there is no voltage:
-
Connect test box to control module wiring harness, connect test box for wiring test.
-
Check for open circuits in wires between test box and connector according to wiring diagram.
Terminal 1 + socket 108