New Beetle GLS L4-1.8L Turbo (AWV) (2001)
Fluid Pump: Service and Repair
ATF pump and pump replacement parts must comply with the transmission code.
1
Piston ring
^
Check that it is correctly located
^
Fig. 1
^
Installing refer to Fig. 2
2
Piston ring
^
Check that it is correctly located =>Fig. 1
^
Installing refer to Fig. 2
3
Piston ring
^
Check that it is correctly located =>Fig. 1
^
Installing refer to Fig. 2
4
Thrust washer
5
Piston
^
Sealing lips are vulcanized to the piston
^
Moisten sealing lips with ATF before inserting
^
Turn piston slightly when installing
6
Bolt, tightening torque 10 Nm (7 ft. lbs.)
^
Then turn 45° further
7
Stator support
8
Outer gear
^
Manufacturer's marking -arrow faces stator support
^
If outer gear is incorrectly installed, the ATF pump may not operate freely in the installed position
9
Inner gear
^
Larger groove faces stator support
10
Housing for ATF pump
11
O-ring
^
Always replace
12
Torque converter oil seal