New Beetle GLS L4-1.8L Turbo (AWV) (2001)
^
Press tabs of retaining clip together -arrows-.
^
Pull locking cable out of selector mechanism.
Installing:
CAUTION!
^
When installing, ensure locking cable routing is correct.
^
Do not kink locking cable.
^
Adjust locking cable after installing.
^
Move selector lever to "P".
^
Press locking cable into support bracket on selector lever housing until tabs on retaining clip -arrows- spread.
^
Attach locking cable in locking lever.
^
Turn ignition ON.
^
Push locking cable into steering lock.
^
Install clip into locking cable.
^
Be sure that clip is properly located.
^
Locking cable, adjusting.