New Beetle GLS L4-1.8L Turbo (AWV) (2001)
/Page-1174001.png)
Flex Plate: Service and Repair
Drive Plate, Removing and Installing
Drive plate, removing and installing
Special tools and equipment
^
VW 558 Retainer
^
Hex bolt M8x45 and two M10 hex nuts
^
Depth gauge
Loosening and tightening drive plate
-
Secure counter-hold tool VW 558 to the drive plate with a hexagon bolt M8x45. Place two M10 hexagon nuts -1- between counter-hold tool and
drive plate.
-
Loosen drive plate bolts.
Installing drive plate
-
Locate drive plate and packing plate with recesses -1-.
-
Install new bolts -3- and tighten to 30 Nm.
