New Beetle GLS L4-1.8L Turbo (AWV) (2001)
1
Transmission housing
-
If replaced adjust input shaft and differential.
2
Needle roller bearing
-
For output shaft
-
Removing
-
Installing and securing
3
Oil filler plug
-
25 Nm (18 ft. lbs.)
-
Without magnet
4
Outer race/tapered roller bearing
-
For output shaft
-
Removing and installing
-
If replaced adjust output shaft
5
Shim
-
For output shaft
-
Adjustment overview
6
Shim
-
For input shaft
-
Adjustment overview
7
Outer race/tapered roller bearing
-
For input shaft
-
Removing and installing
-
If replaced adjust input shaft
8
Outer race/tapered roller bearing
-
For input shaft
-
Removing and installing
-
If replaced adjust input shaft
9
Needle bearing
-
Removing and installing
10
Dowel sleeve
-
Qty. 2
11
Starter bushing
-
Pulling out - Fig. 5
-
Driving in - Fig. 6
-
Car be replaced without removing transmission
12
Clutch housing
-
If replaced, refer to Adjustment overview. See: Adjustments
13
-Guide sleeve