New Beetle GLS L4-2.0L (AVH) (2001)
Amplifier: Service and Repair
Amplifier, Removing And Installing (Monsoon Sound System)
The amplifier is located behind the center load opening cover on the left in the trunk.
Removing amplifier
-
Remove center load opening cover.
-
Remove both nuts, item -1-.
-
Remove cover for assembly opening - arrow-.
NOTE: The assembly opening can be used to gain access to both multi-pin connectors and pull them off the amplifier.
-
Pull off both multi-pin connectors.
-
Take amplifier out of retainer.
Installing amplifier
-
Insert lower part of amplifier into guide rail of retainer.
-
Re-connect multi-pin connectors.
-
Tighten both securing nuts item -1- to 10 Nm (89 in lb).
Further installation is basically reversal of the removal sequence.