New Beetle GLS L4-2.0L (AVH) (2001)
Front Door Exterior Handle: Service and Repair
Carrier, Removing And Installing
Carrier, Removing And Installing
Removing
-
Remove lock cylinder.
-
Remove door handle.
-
Remove component carrier.
-
Remove screw -1-, slide bracket in door rearward and disconnect retaining tab -2- in door cutout.
Installing
Reassemble in reverse sequence.
-
Before installing bracket, check for correct spring lever -1- installation
Spring bracket -1- must be pushed against spring tension in the bracket and locked by lock -2- in this position.