New Beetle GLS L4-2.0L (AVH) (2001)
-
Remove inner cover, left plenum chamber, to do this, slide center cover -1- of plenum chamber forward out of catch and remove from instrument
panel.
-
Remove three bolts -1-.
-
Lift left cover -1- of plenum chamber in center of instrument panel (arrow A) and thereby unclip (front edge clips, back edge clamps).
-
Pull cover -1- toward vehicle center out of bracket underneath A-pillar (arrow B).
-
Carefully press back mounting bracket (arrow).
-
Disengage connector from control module and then disconnect it.
-
Pull control module out of mounting frame.
Installing
Installation is the reverse of removal, noting the following:
-
Check whether the new control module identification matches the old control module identification.
-
Generate readiness code.