New Beetle GLS L4-2.0L (AVH) (2001)
Clockspring Assembly / Spiral Cable: Service and Repair
Return Spring With Slip Ring, Removing And Installing
Removing
-
Remove driver side airbag unit
-
Remove steering wheel.
-
Remove two bolts - arrows -.
-
Remove upper trim for steering column switches - 1 -.
-
Unscrew 3 bolts - arrows -.
-
Loosen height adjustment - 2 - for steering wheel.
-
Remove lower trim -1 - for steering wheel switch.
NOTE: For easier removal of lower trim, remove height adjustment handle (two bolts).
Vehicles without ESP
-
Disconnect harness connector - 1 -.
-
Release catch - arrows - and pull return spring with slip ring from steering column switches.
NOTE:
-
Wheels must be in straight-ahead position when removing or installing return spring with slip ring.
-
A new return ring with slip ring is secured in the centered position with a cable tie.