New Beetle GLS L4-2.0L (AZG) (2002)
CAUTION! Before working on the brake system, read CAUTIONS and WARNINGS.
Notes:
^
Install all parts in repair kit.
^
New brake calipers are filled with brake fluid and are prebled.
^
When assembling, apply a thin coat of grease G 052 150 A2 to brake cylinders, pistons and seals.
1 - Dust cap
2 - Bleeder valve
^
Apply thin coat of brake fluid to threads before installing.
3 - Cap
^
Insert in mounting bushing
4 - Guide pin
^
Tighten to 25 Nm (18 ft. lbs.)
5 - Mounting bushing
^
Insert into brake caliper housing
6 - Brake caliper housing
7 - Brake carrier
8 - Retaining spring
^
Insert with both ends in holes in brake caliper housing
9 - Piston seal
10 - Piston
^
Apply thin coat of brake fluid to piston before inserting
^
Piston diameter: 54 mm (2.125 inch lbs.
11 - Dust boot
^
Do not damage when inserting piston
Special tools and equipment