New Beetle GLS L4-2.0L (AZG) (2002)
When the brake pad is installed, the arrow -A- on the brake pad backing plate must point downward.
CAUTION! When installed, it is important that the arrow on the brake pad backing plate A- points downward.
^
Install outer brake pad in brake caliper.
^
Pull protective foil off outer brake pad backing plate.
^
Install housing with both guide pins (arrows) to brake carrier.
^
Install protective caps.
^
Insert retaining spring into brake caliper housing.
CAUTION! After installing new brake pads, depress brake pedal firmly several times with vehicle stationary to seat brake pads to brake disc.