New Beetle GLS L4-2.0L (AZG) (2002)
-
Check wiring between test box and 6-pin connector for open circuit using wiring diagram.
-
Cylinder 1 terminal 2 + socket 102
-
Cylinder 2 terminal 3 + socket 95
-
Cylinder 3 terminal 4 + socket 103
-
Cylinder 4 terminal 5 + socket 94
Wire resistance: Max. 1.5 Ohms
-
Additionally check wires for short to one another and to positive and Ground (GND).
Specification: Infinity Ohms
If no wiring fault is detected and voltage was present between terminals 1 + 6:
-
Replace engine control module.