New Beetle GLS L4-2.0L (AZG) (2002)
3- Locking collar
4- Synchro-hub
^
Slide locking collar over synchro-hub.
The recesses for locking pieces in synchro-hub and locking collar must align.
Fig. 14 Assembling 5th and 6th gear locking collar/synchro-hub
The locking collar has been pushed over the synchro-hub.
^
Insert locking pieces and install springs 120° offset. Angled end of spring must locate in hollow locking piece.
Fig. 15 Pressing on 5th and 6th gear locking collar/synchro-hub
Fig. 16 Positioning spacer sleeve toward 5th gear locking collar/synchro-hub
Lugs (arrow -1-) of spacer sleeve must line up with recesses in synchrohub (arrow -2-).
Lock pieces (arrow -3-) must rest on collar of spacer sleeve.