New Beetle Turbo S L4-1.8L Turbo (AWP) (2002)
If the control module cannot be coded (correct control module, correct code number), the control module is faulty.
Furthermore, at this point the door control module is called-up and checked.
If an incorrect code was entered and accepted by the control module (e.g. 04096), the display will indicate that communication could not be established
with, for example, the rear door locking units.
Indicated on display:
Door locking unit. BF0022
->
No communication
-
Repeat coding.
End Output (function 06)
-
Press -> button.
Indicated on display
Rapid data transfer
HELP
Select function XX
-
Press buttons -0- and -6- to select "End Output" function 06.
Indicated on display
Rapid data transfer
Q
06 - End Output
-
Press -Q- button to confirm input.
Indicated on display
Rapid data transfer
HELP
Insert address word XX
-
Switch ignition off.
-
Disconnect scan tool from Data Link Connector (DLC).