New Beetle Turbo S L4-1.8L Turbo (AWP) (2002)
-
Remove engine bracket from cylinder block.
Note: When loosening the front engine mount bolt the engine must be raised slightly with the support bracket.
-
Mark direction of rotation of toothed belt.
-
Screw tensioning bolt T10092 into toothed belt tensioning element.
-
Align pressure piston using pointed pliers or wire before tensioning (hole in pressure piston must align with hole in housing).
-
Tension piston of tensioning element just enough that the piston can be locked with locking pin T40011.
-
Remove toothed belt.
-
Turn crankshaft back slightly.
Installing
Note: When turning the camshaft the crankshaft must not be at TDC (danger of damage valves/piston crown).
A - Toothed belt completely removed
If toothed belt has only been removed from camshaft.
Conditions
^
The pistons must not be positioned at TDC