New Beetle Turbo S L4-1.8L Turbo (AWP) (2002)
Wastegate: Testing and Inspection
With Generic Scan Tool
Wastegate bypass regulator valve, checking
Recommended special tools and equipment e.g.:
-
VAG1526 multimeter or VAG1715 multimeter
-
VAG1594 connector test kit
Test sequence
-
Disconnect connector -2- at Wastegate Bypass Regulator Valve -N75- (arrow).
-
Measure resistance between terminals of valve.
Specified value: 25...35 ohms
If specified value is not obtained:
-
Replace Wastegate Bypass Regulator Valve -N75-
-
Vehicles with engine code APH, item 17 ,
-
Vehicles with engine code AWP, AWV, item 22 .
-
Erase DTC memory of Engine Control Module (ECM), Diagnostic mode 4: Reset/erase diagnostic data. See: Computers and Control
Systems/Testing and Inspection/Scan Tool Testing and Procedures/With Generic Scan Tool/Diagnostic Mode 4: Reset/Erase Diagnostic Data
-
Generate readiness code. See: Computers and Control Systems/Testing and Inspection/Monitors, Trips, Drive Cycles and Readiness Codes