New Beetle Turbo S L4-1.8L Turbo (AWP) (2002)
Note
Repair should be performed on maximum of 4 lines.
The following are general instructions. Always read and follow the instructions of the product.
^
Ignition and heated rear window switches OFF.
^
Clean interior surface of rear window with glass cleaner.
^
Using transparent tape, place a strip of tape (approx. 25mm) horizontally on the top and bottom of the inoperative line(s) at the gap (do not cover the
line or the gap with tape)
^
Shake the bottle of Permatex(R) well.
^
Apply Permatex(R) product (using a small brush) over the damage, extend repair approx. 6mm beyond the break in both directions.
^
Wait until product is dry (approx. 30 seconds).
^
Repeat application three times.
^
Remove tape after 30 minutes.
^
Wait 24 hours before switching the heated rear window ON.