Passat L4-1.8L Turbo (AWM) (2004)
^
VAG 1383A Engine/transmission jack with universal transmission mounting VAG 1359/2
Additional information
Refer to Steering and Suspension
Removing
-
Only if there are no marks, mark position of rear driveshaft sections on constant velocity joints with paint (arrows -A- and -B-).
-
Separate driveshaft from rear final drive and tie up.
-
Place transmission jack VAG 1383A with universal transmission mounting 1359/2 under final drive and support final drive.
-
Remove transmission support securing bolts (arrows).
-
Carefully lower final drive until flange is accessible.
-
Mark position of pinion shaft securing nut with paint.
Determining dimension -a- and dimension -b