volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Ignition Cable|Specifications|Page 2437 > < Ignition Cable|Specifications|Page 2435
Page 2
background image

800 - 1200 ohms

If reading is incorrect, replace and retest with new connector.

6.

If both wire connectors are within specifications, replace and retest with new wire.

NOTE: Ignition wire alone, without connector, should have continuity (approx. 0 ohm).

7.

Reinstall all ignition wires.

 

Ignition Cable|Specifications|Page 2437 > < Ignition Cable|Specifications|Page 2435