Passat L4-1984cc 2.0L DOHC (1991)
2
Heater core *
Replace coolant if heater core is replaced
3
Evaporator *
Insert thermostat sensing tube guide before installing
4
Intake air duct *
Coat sealing surface with silicone rubber sealant (locally available)
5
Seal *
Coat sealing surface with silicone rubber sealant (locally available)
6
Evaporator housing (upper) *
Coat sealing surface with silicone rubber sealant (locally available)
7
Fresh air blower series resistance, N23
Includes overheat fuse
8
Intake air ring *
9
Fresh air/recirculation flap vacuum servo *
Insert rod into servo 58 mm (2.3 in.) before installing
10
Fresh air blower housing
Coat sealing surface with silicone rubber sealant (locally available)
11
Fresh air blower, V2
12
A/C thermostat, E33
-
Insert sensing tube into evaporator, 330 mm (13.0 in.)
-
Removing/installing, refer to Sensors and Switches - HVAC, Evaporator Temperature Sensor/Switch. See: Evaporator Temperature
Sensor / Switch/Service and Repair
13
Thermostat cover
14
Tension strap
15
Cover *