volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Wheels/Tires - Vibrations|Page 1594 > < Wheels/Tires - Vibrations|Page 1592
Page 5
background image

Condition

^ Abnormal wear on front or rear tires 

^ Complaints of excessive tire noise

Service

- Verify abnormal tire wear (cupping or feather-edging)

- Check suspension components and wheels for damage

- Replace unevenly worn tires with a set of four Goodyear Eagle GA tires

- Check and adjust front wheel alignment using the preferred settings.

Note:

Before replacing any tires, always contact your DSM for authorization and instructions for prorating.

Service

- Check rear axle alignment using the preferred settings.

* Total toe for the rear axle is adjustable through the use of a special stub axle (-10'). Toe settings on each side must be equalized to the greatest degree
possible by shifting the entire rear axle on its mounts.

Caution:

Front camber corrections must be made at the suspension strut/wheel bearing housing connection only. Do not alter the position of the ball joint in

Wheels/Tires - Vibrations|Page 1594 > < Wheels/Tires - Vibrations|Page 1592