Passat L4-1984cc 2.0L DOHC (1991)
12.
Torque the fuel line bolts to specifications shown, see diagram.
13.
START the engine and check for any fuel leaks at the fuel distributor, repair any leaks immediately.
NOTE: The Fuel Distributor and air flow sensor have several basic adjustments that must be made before final assembly. These adjustments are only a
starting point and some adjustment procedures will be repeated before the proper setting is achieved. Whenever such adjustments are made, the
final step is to check and adjust idle speed and mixture. For these adjustments first refer to FUEL DISTRIBUTOR for the fuel distributor's
basic adjustments, then refer to IGNITION TIMING, CO CONTENT AND IDLE SPEED both are addressed in the ADJUSTMENT
PROCEDURES section.
