Passat L4-1984cc 2.0L DOHC (1991)
Throttle Cable/Linkage: Service and Repair
Automatic Transmission
To replace the Throttle Cable:
Throttle Cable Adjustment
1.
Remove the retaining clip and grommet at the intake manifold cover to slacken cable.
2.
Disconnect the cable end from the throttle valve lever.
3.
Inside the car, pull the cable end from its ball socket on the accelerator pedal assembly.
4.
From the engine compartment, pull the cable through the firewall.
5.
Installation is the reverse of removal.
6.
Adjust cable refer to ADJUSTMENT PROCEDURES.
7.
Check full throttle switch for transmission kick-down signal.
8.
As a final check, depress the accelerator pedal a few times to check for binding before driving the car.
