Passat L4-1984cc 2.0L DOHC (1991)
Shift Linkage: Technical Service Bulletins
A/T - Shift Point Specifications
Group: 37
Number: 379304
Date: April 15, 1993
SUBJECT:
Shift Point Specifications
MODELS:
Passat/Corrado All With 096 Auto Transmission
The new automatic transmission shift point information that follows will be integrated into the appropriate Repair Manuals at the next filming.
Shift Points, checking
If the automatic transmission seems to shift to the next gear too early or too late, check the shift points and compare them with those specified in the
charts which follow.
The observed shift points must fall within the mph (km/h) range specified. Speedometer variations will cause shift point readings to deviate within the
permissible tolerance range.
H = hydraulic shift
M = mechanical shift
Determine the cause of any deviations from the shifting points, by using the On-Board Diagnostic (OBD) procedures in Repair Group O1 (or D3).
Note
Due to torque converter slippage, the 3H - 3M shift can occur at higher speeds than the chart indicates.
