Passat L4-1984cc 2.0L DOHC (1991)
Throttle Valve Cable/Linkage: Adjustments
1. Place spacer of 0.60 inch between accelerator pedal and pedal stop.
2. Fully depress accelerator until it contacts spacer and hold in position.
3. Open throttle by pulling on accelerator cable sleeve, then secure in this position using retainer clip.
4. Connect multimeter tool No. US1119, or equivalent, to kickdown switch using adapter switch tool No. VW 1594, or equivalent, switch must read
infinite ohms.
5. Slowly depress accelerator pedal until full throttle is reached, after kickdown pressure point is reached resistance must drop to 0 ohms.
6. At this point accelerator pedal must be just short of the pedal stop.