Passat L4-1984cc 2.0L DOHC (1991)
Axle Shaft: Service and Repair
1.
With vehicle on ground, remove drive axle retaining nut from wheel assembly.
2.
Remove drive axle to transmission drive flange attaching bolts.
3.
On models except Fox with manual transmission, separate ball joint from wheel bearing housing.
4.
On Fox models equipped with manual transmission, mark position of ball joint to right and left side control arm and separate ball joint from
control arm.
5.
On all models, pull wheel and tire assembly outward and remove drive axle from vehicle.
6.
Reverse procedure to install.
