Passat V6-3.6L (BLV) (2006)
Variable Valve Timing Actuator: Service and Repair
Camshaft Adjuster With Timing Chain, Installing
Camshaft Adjuster with Timing Chain, Installing
‹› A revised camshaft adjuster is being installed as of 12.08. To recognize this, the exhaust camshaft adjuster 32A has a plastic cover.
=> [ Vehicles through 11.08 ]
=> [ Vehicles from 12.08 ]
Vehicles through 11.08
Special tools, testers and auxiliary items required
‹› Camshaft Bar (T10068 A)
‹› Counter-Holder Tool (T10069)
‹› Torque Wrench (5-50 Nm) (V.A.G 1331)
‹› Torque Wrench (40-200 Nm) (V.A.G 1332)
‹› Adjustment Tool (T10332) (Without a mechanical vacuum pump)
‹› Adjustment tool (T10363) (With a mechanical vacuum pump)
‹› Sealant (D 176 501 A1)
-
Rotate the crankshaft, using the vibration damper bolt, in engine rotation direction to the Top Dead Center (TDC) mark - arrow - for cylinder 1.
-
Position the camshafts in the cylinder head to the TDC for cylinder 1.
The camshaft lobes - A - for cylinder 1 must face each other.