Passat 4Motion V6-2.8L (ATQ) (2005)
^
Torque wrench V.A.G 1331
^
Brake pedal loading device V.A.G 1869/2
The ABS hydraulic unit N55 and hydraulic pump for traction control V156 are located in the left side of engine compartment.
1 -
Hydraulic unit with ABS return flow pump
The hydraulic unit and ABS return flow pump form one unit and must always be replaced together if malfunction exists.
2 -
Hydraulic pump for traction control with brake pressure sensor.
The hydraulic pump for traction control and the brake pressure sensor form one unit and must always be replaced together if malfunction exists.
CAUTION! Do not bend the brake lines in the area of the hydraulic unit!
Removing
-
Note or request radio code on vehicles with coded radio if necessary.
-
Disconnect battery.