Passat 4Motion V6-2.8L (ATQ) (2005)
1 -
Mounting bracket
2 -
Pivot pin for clutch and brake pedal
^
Installation location: The groove - arrow - points toward clutch pedal.
3 -
Securing clip
4 -
Hex socket head bolt, 25 Nm
5 -
Brake pedal
^
Push onto pin
6 -
Clutch pedal
7 -
Pin
^
Always replace
8 -
Securing clip
9 -
Master cylinder
10 -
Hex socket head bolt, 20 Nm
11 -
Bushing
^
Insert into mounting bracket with over-center assist spring
^
Installation location: Deep groove faces downward
^
Application Parts Catalog
12 -
Over-center assist spring
13 -
Hex socket head bolt, 5 Nm
^
For securing the pivot pin for clutch and brake pedal