volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

6-Cylinder Injection Engine, Assembly Overview|Page 9858 > < 6-Cylinder Injection Engine, Assembly Overview|Page 9856
Page 5
background image

Allocating ignition cables to ignition coils
A - Ignition coil for cylinders 5 and 3
B - Ignition coil for cylinders 4 and 2
C - Ignition coil for cylinders 6 and 1

Ignition cables are marked with number 1 to 6.
^

Allocate ignition cables 6 and 1 to ignition coil - C -.

^

Allocate ignition cables 2, 3, 4 and 5 in the same manner.

6-Cylinder 5-Valve Injection Engine, Assembly Overview

6-cylinder 5-valve injection engine, assembly overview

There is no provision for servicing the power steering pump. If a malfunction is present, the power steering pump must be replaced.

Note: 
^

If the fluid level in the reservoir is low, the steering system must be inspected for leaks.

^

If there are leaks in the area of the line connections, the lines/connections must first be inspected for leaks, tightened as necessary and wiped dry.

^

Pumps from service parts do not contain fluid. They must be filled with hydraulic fluid G 002 000 before installation and turned by hand,
otherwise pump noise or damage can result in operation.

^

Type of fluid. Hydraulic fluid G 002 000

^

System oil capacity. 0.7 to 0.9 l

6-Cylinder Injection Engine, Assembly Overview|Page 9858 > < 6-Cylinder Injection Engine, Assembly Overview|Page 9856