Passat GLS 4Motion V6-2.8L (ATQ) (2002)
Rear Bumper Cover, Removing And Installing 10.00 -->
Removing
-
Removing tail light assembly: Electrical Equipment; Repair Group 94; tail light assemblies.
-
Remove bolts - 2 - in area of wheel housings.
-
Bolts - 5 - and - 6 - must be Removed from below out of cover - 1 -.
-
Remove bolts - 4 - under tail light assemblies.
-
With a second mechanic, pull cover parallel out of guides.
-
Harness connectors must be disconnected from installed electrical components.
Installing
Installation is reverse order of removal.
-
Make sure gaps are parallel and gap dimensions.
Rear Bumper Cover Accessories, Assembly Overview
Rear Bumper Cover Accessories, Assembly Overview 10.00 -->