Passat GLS 4Motion V6-2.8L (ATQ) (2002)
Trunk / Liftgate Latch: Service and Repair
Up To 09/2000
Trunk Lid Lock, Assembly Overview --> 09.00
1
-
Lock cylinder carrier
-
Lock cylinder can only be removed in conjunction with carrier.
2
-
Nut
-
Qty 2
-
7 Nm
3
-
Handle trim
-
Lock cylinder carrier, removing.
-
Remove nuts - 2 - and remove handle trim from lid.
4
-
Handle
5
-
Push button
6
-
Pop rivet
-
Pull in using Pop rivet tongs V.A.G 1765 A
7
-
Base for license plate
-
Press on only on hatched area
-
Replacement part has two foils. first foil covers adhesive surface, second must be removed after installing
8
-
Lock
-
Removing.
- Remove lid trim.
- Disconnect harness connector from lock.
- Unclip operating rod - 12 -, remove nuts - 2 - and remove lock from lid.
-
Installing: