Passat GLS 4Motion V6-2.8L (ATQ) (2002)
1. Subframe
^
Aligning subframe to vehicle
2. Washer
3. Nut, 40 Nm
4. Protective plate
5. Washer
6. Hex bolt M12 x 1.5 x 130
7. Bonded rubber mounting
^
Replacing rubber bonded mounting
8. Hex bolt M 10x 75
9. Hex socket head bolt M10 x 45, 55 Nm
10. Hex socket head bolt M10 x 25, 40 Nm
11. Final drive support
^
Replacing bonded rubber mounting
12. Final drive
^
If the final drive IS removed, the protective plate -item 4 must be removed on some vehicles see fig 1
13. Cross member
^
Replacing bonded rubber mounting