Passat GLS 4Motion V6-2.8L (ATQ) (2002)
^
First press brake pedal in direction of brake servo and hold.
^
Insert special tool T 10006 A and pull in direction of driver's seat. When doing this counter-hold brake pedal. (The pedal must not be allowed to
move backward). This forces the mounting retaining lugs -3- off the ball head of the push rod -2-.
1 - Brake pedal
2 - Push rod
3- Retaining lugs
Note: For ease of illustration the separation of the brake pedal from the brake servo is shown with the pedal cluster removed.
^
Pull special tool T 10006 A and brake pedal together towards the driver's seat. (This forces the brake pedal off the ball head of the push rod).
^
Remove brake pedal from push rod.
^
Remove plenum chamber cover.
^
Remove water deflector.
^
Place sufficient lint-free cloths in plenum chamber in the area of the brake master cylinder.
^
Open brake fluid reservoir.