Passat GLS 4Motion V6-2.8L (ATQ) (2002)
Air Injection Pump: Service and Repair
Secondary Air Injection (AIR) system components, removing and installing
Secondary Air Injection (AIR) Pump Motor -V101- Assembly Overview
Note: Components marked with an * are checked by the On Board Diagnostic (OBD)
-
Components marked with ** are checked by the output diagnostic test mode.
1. Secondary Air Injection (AIR) pump motor V101 */**
2. Front right - longitudinal member
3. 10 Nm
4. Bracket
-
For secondary air injection pump motor
-
Secured to intake manifold
5. Insulation ring
-
Securing collar must face to pump eye
6. Protective cap
7. Connector
-
For secondary air injection pump motor
-
Black, 2-pin
8. To connecting pipe
9. Pressure hose
-
Ensure seated tightly