Passat GLS 4Motion V6-2.8L (ATQ) (2002)
-
Fit connector to sensor for transmission RPM -1 -.
-
Install valve body.
-
Fill with ATF.
Transmissions With Hydraulic Control E18/2
Transmissions with hydraulic control E18/2
Removing
-
Remove valve body.
-
Unbolt sensor for transmission RPM signal -A- from transmission.
Installing
-
Attach sensor for transmission RPM -A- to transmission with bolt-B- and tighten.
-
So that the wire does not become trapped when installing the valve body, route the wire with connector -C- according to the diagram.
-
Install valve body.
-
Fill with ATF; check ATF level and top up.