Passat GLS 4Motion V6-2.8L (ATQ) (2002)
/Page-1988006.png)
NOTE: When installing, markings - 3 - and - 4 - must align to guarantee correct installation position of components.
-
Remove bolts - 1 - and - 2 - (5 Nm) and remove belt guide - 3 -.
-
Unscrew bolt - 1 - (40 Nm) and remove automatic belt retractor - 2 - from mount in body.
-
Guide belt sliding tab - 3 - and belt end fitting - 4 - through opening in body.
Installing
Installation is the reverse order of removal.
Rear Center Seatbelt - Assembly Overview
Rear Center Seatbelt - Assembly Overview
