Passat GLS 4Motion V6-2.8L (ATQ) (2002)
-
Remove right-hand drive axle protective plate -arrows-. The third bolt cannot be seen in the illustration.
-
Remove right-hand drive axle -1-.
-
Remove flange shaft bolt-arrow- (use pin to prevent flange turning).
-
Place VAG1306 Drip tray underneath.
-
Pull out right flange shaft.
-
Remove flange shaft oil seal.
Installing
-
Apply gear oil to circumference and sealing lips of seal.
-
Half fill space between sealing lip and dust lip with grease G 052 128 A1.
Installation position:
Open side of seal faces transmission.