Passat GLS 4Motion V6-2.8L (ATQ) (2002)
1. Shift lever knob
-
Screw on and off together with cover
2. Cover
-
Separating from shift lever knob see Fig. 1
-
Connect to shift lever knob before installing
3. Securing clip
-
Always replace
4. Spacer sleeve
5. Spring
6. Ball stop
-
Insert spring and bush in the ball stop and assemble on the shift lever so that the spring and bush are on the right when looking forwards.
-
Install ball stop before fitting circlip (item 18).
7. Spring
8. Bush
-
Fitting position: The rounded end faces the shift lever
9. Shift lever
-
Only fits in one position in the ball housing
10. Spacer tube
11. Hexagon nut, 10 Nm
12. Hexagon nut, 10 Nm
13. Cover
14. Hexagon nut, 25 Nm
15. Connecting piece
16. Hexagon nut, 25 Nm
17. Connecting piece
18. Circlip