Passat GLS 4Motion V6-2.8L (ATQ) (2002)
1. Shift lever knob
-
Screw on and off together with cover
2. Bush
3. Cover
-
Separating from shift lever knob see Fig. 1
-
Connect to shift lever knob before installing
4. Boot
-
Always replace
5. Shift lever
6. Spacer tube
7. Hexagon nut, 10 Nm
8. Cover
9. Securing clip
-
Always replace
-
Remove before removing the shift lever
10. Washer
11. Rubber seal
12. Ball socket
13. Rubber seal
14. Rear push rod
15. Bolt, 6 Nm
-
Qty. 4
-
For rear slide rod to shift lever housing