volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Front Bumper Reinforcement > < Front Bumper Cover Accessories, Assembly Overview|Page 10568
Page 3
background image

-

Remove radiator grille.  See: Grille/Service and Repair

-

Remove upper bolts -2-.

-

Remove quick-release screw -6- from below.

-

Remove bolts -5- and -4- (pointing upward) in area of wheel housing liner.

-

With a second mechanic, pull cover parallel out of guides.

-

Disconnect harness connectors of installed electrical components and hoses.

Installing

Installation is reverse of removal.

-

Make sure gaps are parallel and gap dimensions.

NOTE:  Headlight lens must lie at bottom on protective profile and bumper cover. Loosening bolts for headlight and adjusting  See: Lighting and
Horns/Headlamp/Adjustments

Front Bumper Reinforcement > < Front Bumper Cover Accessories, Assembly Overview|Page 10568