Passat GLS Wagon L4-1.8L Turbo (AUG) (2001)
-
Guide seatbelt with sliding tab and belt end fitting -- through trim --.
-
Place trim in installation position and clip onto B-pillar, make sure seatbelt height adjuster is seated properly.
-
Bolt belt end fitting - 3 - to sill with bolt - 2 - (40 Nm).
-
Clip in door sill trim - 1 -.
-
Install lower A-pillar trim.
-
Make sure that door seals are properly seated.
Lower B-Pillar Trim, Removing and Installing
Lower B-pillar Trim, Removing And Installing
Removing
-
Remove lower A-pillar trim.
-
Unclip door sill trim from front unto behind B-pillar.
-
Remove upper B-pillar trim.