Passat GLS Wagon L4-1.8L Turbo (AUG) (2001)
^
Install both protective caps.
^
Install retaining spring into brake caliper housing.
^
Insert brake wear indicator connector into bracket on brake caliper.
The wiring for the brake wear indicator must be routed between the brake carrier and brake line.
Notes:
^
When inserting the outer brake pad, make sure that it does not stick to the brake caliper housing before achieving correct installation position.
^
Do not damage adhesive surface.
^
After replacing brake pads and with vehicle stationary, firmly depress brake pedal several times so that the brake pads are properly seated in their
normal operating position.
^
Check brake fluid level after changing brake pads.
2FN Brake Caliper
2FN brake caliper
Brake pads, removing and installing
Special tools and workshop equipment required
^
VAG 1331 Torque wrench (or equivalent)
^
Piston resetting tool
Removing
Note: When reusing brake pads mark location, install in same position otherwise uneven braking!
^
Remove wheels.