Passat GLS Wagon L4-1.8L Turbo (AUG) (2001)
^
Place protective seal with the outer sealing lip on the piston.
^
Using 3409 wedge, insert the inner sealing lip into the cylinder grove.
Note: Hold piston in front of caliper housing.
^
Press piston into the brake caliper housing using piston resetting tool.
Note: The sealing lip of protective outer seal will then engage in the piston groove.
2FN Brake Caliper
Notes:
^ Only use appropriate solvents for cleaning brake parts.
^ Install all parts supplied in repair kit.
^ New brake calipers are filled with brake fluid and are prebled.
^ Apply a thin coat of installing paste G 052 150 A2 to brake cylinders, pistons and seals.
1 - Brake carrier
^
Install on brake caliper housing
2- Ribbed combi bolt, 190 Nm