Passat GLS Wagon L4-1.8L Turbo (AUG) (2001)
Power Steering Fluid: Testing and Inspection
-
Do not start engine but bring front wheels to straight-ahead position.
Oil in cold condition:
-
Unscrew cap.
-
Clean dipstick with a clean cloth.
-
Screw cap on hand tight and unscrew again.
Note: The cap must be fully screwed in order to obtain an accurate fluid level reading.
-
Check oil level: The oil level must be in area of MIN. marking (up to 2 mm above or below marking).
Oil at operating temperature (above approx. 50°C):
-
Check oil level: The oil level must be between MIN. and MAX. marks.
Notes:
^
If the fluid level is above the area specified, the excess fluid must be extracted.
^
If oil level is below above mentioned area, then the hydraulic system must be checked for leaks. It is not sufficient to top-up with oil.